Designed for internal floor applications

 Features & Benefits

• For fixing ceramic tiles on interior floor & wall
• Ideal for new floor tiling
• Economical & easy to use
• Single component – Just add water
• Crack, breakage free firm surface that preserves beauty of tiling for longer time
• Ready to use, needs no curing
• Excellent adhesion, low shrinkage

Method of Application 

• The surface to be tiled should be sound and thoroughly cleaned. Surface should be free from wax, grease, polish etc.
• Add 3 to 3.5 parts of powder to 1 part of water.
• Mix with a trowel or slow speed drills (50 – 100 rpm) until a lump free homogeneous paste is obtained.
• Always mix the required quantity, which can be consumed within 60 min. pot life.
• Leave mixture for 5-10 min. and remix before use. Mix only sufficient quantity of adhesive for immediate need.
• Spread the adhesive to a thickness of approx. 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 10 to 15 mins.
• The most important standard to keep in mind is to insure that the piece of tile is completely bedded in the mortar or adhesive with 100% coverage and to eliminate the possibility of any air voids.
• Excess mortar on adhesive shall be cleaned from the surface of the stone with wet cloth or sponge while the mortar is fresh.
• If a plaster/levelling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before application of tile adhesive for installation of tile
• Dampen the wall before application of thin set adhesive
• Keep joints between two-tiles using spacers.
• Start filling joints only after 24 hrs. With  Bendito Epoxy Kit or Bendito TG Mix

Precautions & Limitations

• For laying tiles on floor, surface should be sufficiently hard & good condition.
• Always add powder to water & never add water to powder.
• Do not add excess water than recommended.
• Never add sand & cement at site.
• Strictly not recommended for tiling on gypsum plaster, paint,wood & metal.
• Do not use for vertical cladding of heavy stone & tiles.
• Not recommended for Tile on Tile application.

Technical Information

Product Type:  Powder

Colours: Cement Grey Powder

Mix ratio: Approx. 3 to 3.5 = Powder: 1 part of water (by vol.)

Open time: Approx. 10 – 15 minutes at 30° C

Pot life: approx. 60 – 90 min. at 30° C

Coverage: 5 – 5.5 Sq. mtr. / 20 Kg Bag at 3 mm thickness

2 – 2.5 Sq. mtr. / 20 Kg Bag at 6 mm thickness

Trafficable time: 24 hrs (max.)

Shelf Life: 12 months pack sealed and stored in dam proof conditions

Packaging – 20 Kg