Bendito SUPER is a polymer-modified, advanced white-based tile adhesive with the latest technology for installing every type of ceramic, semi-vitreous tile, and vitrified tiles of small to medium size in interior/exterior areas. It is suitable for both vertical and horizontal surfaces over cementitious substrates for indoor application. For improved performance, tile-on-tile applications, and external floor areas, use with Bendito Stone Faijar.

Areas of Application:

• Designed for internal and exterior wall/floor applications.

Features & Benefits:

• For fixing ceramic tiles and vitrified tiles on interior floors and walls.
• Ideal for new floor tiling.
• Easy to use – just add water on site, ready to use.
• Crack and breakage-free, firm surface that preserves the beauty of tiling for a longer time.
• Ready to use, needs no curing.
• Excellent adhesion, low shrinkage.
• Water-resistant – suitable for wet areas.
• Good adhesive bond strength & bonds to various cement-based substrates.
• Low VOC – for healthy living.

Method of Application:

1. The surface to be tiled should be sound and thoroughly cleaned. The surface should be free from wax, grease, polish, etc.
2. Add 3 to 3.5 parts of powder to 1 part of water.
3. Mix with a trowel or slow-speed drill (50-100 rpm) until a lump-free homogeneous paste is obtained.
4. Always mix the required quantity, which can be consumed within a 60-minute pot life.
5. Leave the mixture for 5-10 minutes and remix before use. Mix only sufficient quantity of adhesive for immediate need.
6. Spread the adhesive to a thickness of approximately 3-6 mm and comb with a notched trowel. Strictly apply the adhesive paste which can be tiled within 10 to 15 minutes.
7. Ensure that the tile is completely bedded in the mortar or adhesive with 100% coverage to eliminate any air voids.
8. Clean excess mortar or adhesive from the surface of the stone with a wet cloth or sponge while the mortar is fresh.
9. If a plaster/leveling mortar bed is applied, ensure that it is cured for at least 7 days to achieve proper strength before applying tile adhesive.
10. Dampen the wall before the application of thin-set adhesive.
11. Keep joints between two tiles using spacers.
12. Start filling joints only after 24 hours with Bendito Epoxy Kit or Bendito TG Mix.

Precautions & Limitations:

• For laying tiles on the floor, the surface should be sufficiently hard and in good condition.
• Always add powder to water and never add water to powder.
• Do not add excess water than recommended.
• Never add sand and cement at the site.
• Not recommended for tiling on gypsum plaster, paint, wood, or metal.
• For heavy tile applications or external floor areas, use with Bendito Stone Faijar.

Technical Information:

• Product Type: Powder
• Colors: White Free Flow Powder
• Mix Ratio: Approx. 3 to 3.5 parts powder to 1 part water (by volume)
• Open Time: Approx. 10-15 minutes at 30°C
• Pot Life: Approx. 60-90 minutes at 30°C
• Coverage:
  • 5-5.5 sq. meters per 20 kg bag at 3 mm thickness
  • 2-2.5 sq. meters per 20 kg bag at 6 mm thickness
• Trafficable Time: 24 hours (max.)
• Shelf Life: 12 months for sealed packs when stored under cover, out of direct sunlight, in damp-proof conditions, and protected from extremes of temperature.
• Packaging: 20 kg